Bowers & Wilkins 702 S2 - Rosenut - Floorstanding Speakers - Pair
About the Bowers & Wilkins 702 S2 - Rosenut - Floorstanding Speakers:
The 700 Series premium floorstanding speaker incorporates a wealth of advanced technology, including a massive Carbon Dome™ tweeter.
Bowers & Wilkins 702 S2's solid-state tweeter
The solid tweeter enclosure is milled from a block of aluminum to form an acoustically optimized construction that is exceptionally inert and impervious to resonances.
Carbon Dome™ tweeter
Carbon Dome™ tweeters are a brand new technology developed specifically for the 700 Series They represent a vast improvement over the aluminum dual dome tweeter and push the break-up limit to 47kHz, for a particularly accurate image and high detail.
Continuum™ cone of Bowers & Wilkins 702 S2 - Rosenut - Floorstanding Speakers
The Continuum™ cone introduced with the 800 Series Diamond represents the biggest change in midrange reproduction since Kevlar®. The coated, woven material delivers a highly controlled break-up that results in more open, neutral mids.
Decoupled midrange drivers
The midrange drivers in the floorstanding speakers are decoupled. This is derived from a similar system in the 800 Series Diamond. The decoupling reduces cabinet coloration and further improves midrange clarity.
Cone with Aerofoil™ profile for the low end
Developed with advanced computer modeling techniques, this Aerofoil™ profile cone for the low end has a variable thickness that provides stiffness and rigidity where it is needed most. This results in deep and dynamic bass.
Technical features of Bowers & Wilkins 702 S2 - Rosenut - Floorstanding Speakers
- Decoupled, carbon-reinforced, dual dome tweeter
- Tweeter with a massive body on top
- Continuum taper FST for the center
- Decoupled midrange drivers
- Cones with Aerofoil profile for the layer
- Flowport™
Specifications of the Bowers & Wilkins 702 S2 - Rosenut - Floorstanding Speakers
- 3-way box system with Flowport™
- Drivers:
- 1x ø25 mm decoupled, carbon-reinforced, dual dome tweeter for the highs
- 1× ø150 mm Continuum taper FST for the center
- 3x ø165 mm cone with Aerofoil profile for the low end
- Frequency range: -6 dB at 28Hz and 33kHz
- Frequency response: 45 Hz - 28 kHz ±3 dB
- Sensitivity: 90 dB spl (2.83 Vrms, 1m)
- Harmonic distortion: second and third harmonics (90 dB, 1 m):
- <1% 86 Hz – 28 kHz
- <0,5% 110Hz – 20kHz
- Nominal impedance: 8 Ω (minimum 3.1 Ω)
- Recommended amplifier power: 30 W - 300 W at 8 Ω at undistorted program
- Dimensions:
- Height: 994 mm just the cabinet 1087 mm including tweeter and base
- Width: 200 mm just the case 366 mm incl. base
- Depth: 337 mm just the cabinet 364 mm incl. grill and terminals 414 mm incl. base
- Net weight: 29.5kg
- Finish options Cabinet: Rosenut Gloss Black Satin White
- Grill: Black Gray (Satin White only)
