Bowers & Wilkins SA250 MK2 EC/UK - Subwoofer Amplifier - For ISW-3 and ISW-4
About the Bowers & Wilkins SA250 MK2 EC/UK - Subwoofer Amplifier:
The SA250 Mk2 subwoofer amplifier is designed specifically for use with the Custom Installation Series wall-mounted speakers, the ISW-3 and ISW-4. With its weight of 5.4 kg and 9 cm height it is particularly slim; power 250 watts. The equalizer of the SA250 Mk2 is adapted to the in-wall subwoofers with a two-position switch for the ISW-3 and the ISW-4.
Specifications of the Bowers & Wilkins SA250 MK2 EC/UK - Subwoofer Amplifier
Type
SA250 Mk2
Description
250W rack-mount amplifier with built-in subwoofer equalizer
Front panel
Rotary control volume (line in) / Rotary control filter frequency / (4th order Linkwitz, 40 - 140 Hz) / Low pass filter in/out / Phase 00/1800 switch / Extra Bass switch 3 positions / Movie/Music EQ switch / On/auto/standby switch / Status L
Rear
Selector switch type (ISW-3 or ISW-4).
Amplifier inputs of the Bowers & Wilkins SA250 MK2 EC/UK
- 2 x Cinch, line in
- 2 x Cinch Link out
- 1 x XLR line in
- 1 x XLR link out
- 3.5 mm jack 12 V trigger in/standby (passes manual standby)
- 3.5 mm jack - 12 V equalizer film/music
Amplifier Outputs of the Subwoofer Amplifier
1 x Neutrik® Speakon® 4-pole speaker output / 2 pairs of clamping screws
Output power
250 W
Input impedance
33 kΩ
Signal / Noise
> 80 dB
Rated power consumption
95 W - 1/8 of full power / 30 W - idle / 1 W standby
Height of Subwoofer Amplifier
100 mm (3.9") [88.5 mm (3.5") plus feet)
Width of Amplifier
430 mm (16.9")
Depth of the Amplifier
322 mm (12.7")
Front panel height
2U 88.1 mm (3.5")
Net weight
5.4 kg (11.9 lb)
Finishes of the Bowers & Wilkins SA250 MK2 EC/UK
Black
