Fyne Audio F501SP - Walnut High Gloss - Floorstanding Speakers - Pair

About the Fyne Audio F501SP - Walnut High Gloss - Floorstanding Speakers - Pair:

This Special Projects version of the F501 uses the top-of-the-line 6″ (15 cm) IsoFlare™ unit and the equally large mid/low unit as used in the 700 Series, complete with multi-fiber cones and FyneFlute™ notched rubber surrounds. The 1" (25 mm) magnesium tweeter is mounted in the acoustic center of the IsoFlare™ unit. A waveguide placed in front of the tweeter ensures a particularly homogeneous response across the entire frequency range. Also incorporated in this model are the crossover technology and aluminum plinth with BassTrax™ diffuser that make the more expensive F700 Series perform so well. The F501SP is available in high-gloss white and high-gloss black and, for a small additional charge, in high-gloss walnut.

Specifications of the Fyne Audio F501SP - Walnut High Gloss - Floorstanding Speakers - Pair

• System Type: 2 ½ way, downwards firing port, with BassTraxTM Tractrix diffuser*, twin cavity loading system
• Recommended amplifier power (Watts RMS): 30 - 180
• Continuous power handling (watts RMS): 80
• Sensitivity (2.83 volts @ 1m): 91dB
• Nominal impedance: 8 ohms
• Frequency response (-6dB typical in room): 36Hz - 34kHz
• Drive unit complement:
  • 1 x 150mm IsoFlare point source driver multi-fibre bass/midrange cone FyneFlute surround with 25mm magnesium dome compression tweeter neodymium magnet system.
  • 1 x 150mm multi-fibre bass cone, FyneFlute surround.
• Crossover frequency: 250Hz & 1.7kHz
• Crossover type: Bi-wired passive low loss, 2nd order low pass, 1st order high pass
• Dimensions - HxWxD: 984 x 288 x 318mm (38.7 x 11.3 x 12.5")
• Weight - Each: 21.0kg (46.3lb)
• Finishes: Piano Gloss Walnut / Piano Gloss Black / Piano Gloss White

Viewing this product on the manufacturer's website.

View all floorstanding speakers.