Parasound Halo JC 1+ - Black - Mono Amplifier - By John Curl - 400 W
About the Parasound Halo JC 1+ - Black - Mono Amplifier:
Halo is our premier line with a reputation for taking on the most expensive equipment on the market at a fraction of the price. Halo has earned unparalleled accolades and awards.
Features of the Parasound Halo JC 1+ - Black - Mono Amplifier
- Circuitry designed by legendary John Curl
- Ultra-high bias Class A/AB operation
- 25 watts of pure Class A power
- Stable with speaker impedance dips below 1Ω
- Bybee Music Rails™ - active high frequency filters for input stage
- New John Curl driver stage employs a cascode circuit for greater open loop bandwidth & superior linearity
- Gain switch to select 29 dB or 23 dB gain for optimum compatibility with high gain preamps or extremely efficient speakers
- R-core transformer for input stage suppresses noise on power line
- 6 massive 33,000 uF Nichicon Gold Tune filter capacitors for output stage
- 22,400 uF input stage power supply filter capacitors, independent of the main power supply
- Dual CHK Infinium, custom 5-way speaker binding posts for easy bi-wiring
- Neutrik locking XLR balanced input & loop output jacks
- Vampire 24k gold-plated RCA input & loop output jacks
- Direct-coupled signal path, no capacitors or inductors in the audio path
- JFET input stage, MOSFET driver stage
- 24 beta-matched 15 ampere, 230V, 60 MHz bipolar output transistors
- 2.1 kVA shielded toroid power transformer with premium H18 grade core
- Independent power supplies for input stage, driver stage & output stage
- Full power is rated all the way down to 2Hz for unrestricted low-end bass
- Harris hyper-fast soft-recovery bridge diode rectifiers
- REL & Nichicon Muse capacitors
- DC servo & relay protection circuits
- AC turn-on inrush surge protection with relay bypass
- Automatic turn-on by 12 V trigger or audio sensing
- 4 rack space chassis with rear carry handles
- Rack mount hardware is included
- Available in silver or black
Specifications of the Parasound Halo JC 1+ - Black - Mono Amplifier
Power Output
- 450 x1 watts @ 8 Ω
- 850 x1 watts @ 4 Ω
- 1300 x1 watts @ 2 Ω
Power measurements are with 120 VAC
0.15% THD, RMS continuous power, full audio band (20 Hz - 20 kHz)
Class A Power Output
- 25 Watts, bias switch set to high
- 10 Watts, bias switch set to low
Current Capacity
180 amps, peak
Slew Rate
> 130 volts per microsecond
Frequency Response
- 2 Hz - 120 kHz, +0/-2 dB
- 20 Hz - 20 kHz, +0/-0.25 dB
Total Harmonic Distortion (THD).
- < 0.15 % at full power
- < 0.02 % at typical listening levels
IM Distortion
< 0.03 %
TIM
Unmeasurable
Damping Factor
> 1200 at 20 Hz
Input Impedance
- Unbalanced: 50 kΩ
- Balanced: 100 kΩ, (50 kΩ per leg)
S/N Ratio, inputs shorted
- >122 dB, IHF A-weighted, bias set to Low
- >120 dB, IHF A-weighted, bias set to High
- >113 dB, Unweighted, bias set to Low
- >111 dB, Unweighted, bias set to High
Total Gain
- 29 dB (Gain switch set to normal)
- 23 dB (Gain switch set to low)
Input Sensitivity for 28.28 V Output into 8 Ω.
- Unbalanced: 1 V
- Balanced: 1 V per leg
(Gain switch set to normal)
DC Trigger Requirements
+9 Vdc to +12 Vdc, 5 mA
Audio Trigger Requirement
2.5 mV - 10 mV
XLR Pin Identification
- 1 = Ground (Shield)
- 2 = Positive
- 3 = Negative (Return)
Dimensions
- Height without feet: 7-1/8″ (181 mm)
- Height with feet: 7-3/4″ (197 mm)
- Depth: 20″ (508 mm)
- Depth with cables: 21-1/2″ (546 mm)
Shipping Carton Dimensions
- Width: 29-1/2″ (750 mm)
- Depth: 27-1/2″ (700 mm)
- Height: 15-3/4″ (400 mm)
Net Weight
83 lb. (37.6 kg)
Shipping Weight
107 lb. (48.5 kg)
Power Requirement
- Standby: <1 Watt
- Idle (bias set to low): 145 Watts
- Idle (bias set to high): 275 Watts
- Typical Listening levels: 400 Watts
- Maximum: 1500 Watts
Reviews
There are no reviews yet.